Honda CB500F/FA Manual page 79

Adjusting the Drive Chain Slack
Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
CB500FA only
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
Shift the transmission to Neutral. Stop the
1.
engine.
Place your motorcycle on its side stand on
2.
a firm, level surface.
Loosen the rear axle nut.
3.
Loosen the lock nuts on both sides of the
4.
swingarm.
Drive Chain Adjusting the Drive Chain Slack
u
Pulser ring
CB500FA only
Lock nut
Adjusting
nut
Adjusting nut
Wheel speed
sensor
CB500FA only
Rear axle
nut
Rear edge of
adjusting slot
Chain adjuster
index mark
Lock nut
Continued
77