Honda CB500F/FA Manual page 70

Engine Oil Changing Engine Oil & Filter
u
Oil filter
Rubber seal
Apply a thin coat of engine oil to the
7.
rubber seal of a new oil filter.
Install the new oil filter and tighten.
8.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
68
Install a new sealing washer onto the
9.
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
Fill the crankcase with the recommended
10.
oil ( P. 52, P. 130) and install the oil fill
2 2
cap.
Required oil
When changing oil & engine oil
filter:
2.9 US qt (2.7 L)
When changing oil only:
2.6 US qt (2.5 L)
Check the oil level.
11.
Check that there are no oil leaks.
12.
P. 65
2