Page 3
4. Connect the battery lead and controller lead together. 1. Unpack the powerchair and place the Check that the battery is locked in position, underneath powerchair so the front is on the floor. the seat. 5. Unfold the powerchair. At the rear of the chair, set the right hand switch to ‘I’.
Page 4
7. Put freewheel levers into ‘Electric’ mode by 10. Charge battery. The battery can be charged via the pushing the levers forward. Repeat for both powerchair by inserting the charger into the socket on motors. the underside of the joystick. The battery can also be charged directly when removed from the powerchair.
Need help?
Do you have a question about the Drive AutoFold and is the answer not in the manual?
Questions and answers