Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DeVilbiss Healthcare drive Seren
Summary of Contents for DeVilbiss Healthcare drive Seren
- Page 1 User Manual...
-
Page 3: Table Of Contents
SEREN Instruction Booklet TABLE OF CONTENTS INTRODUCTION -----------------------------------------------------------------1 IMPORTANT PRECAUTIONS ------------------------------------------------2 ELECTROMAGNETIC INTERFERENCE AND WARNINGS ---------3 SAFETY WARNING AND INSTRUCTION LABELS ---------------------5 PRODUCT OVERVIEW ---------------------------------------------------------6 OPERATING YOUR POWER CHAIR ---------------------------------------8 GBK54030 LiNX LE SYSTEM INSTALLATION -------------------------11 DISASSEMBLING / RE-ASSEMBLING YOUR POWER CHAIR ---18 CHARGING THE BATTERIES ----------------------------------------------19... -
Page 4: Introduction
2514 AP The Hague The Netherlands Manufacturer : Chien Ti Enterprise Co., Ltd No.13, Lane 227 Fu Ying Rd, Hsin Chuang District, New Taipei City, Taiwan Importer : Drive DeVilbiss Healthcare Ltd. Sidhil Business Park, Holmfield, Halifax, West Yorkshire, HX2 9TN, Great Britain... -
Page 5: Important Precautions
SEREN Instruction Booklet IMPORTANT PRECAUTIONS •Only one person at a time can ride a Drive DeVilbiss Power Chair. •Maximum load is 136 kg/300 lbs. •Turn off power before getting on or off your power chair. •Always drive carefully with your feet on the footplate and be aware of others in your area. •Always use pedestrian crossings wherever possible. -
Page 6: Electromagnetic Interference And Warnings
SEREN Instruction Booklet ELECTROMAGNETIC INTERFERENCE AND WARNINGS CAUTION: It is very important that you read this information regarding the possible effects of Electromagnetic Interference on your power chair. Powered wheelchairs and motorized scooters may be susceptible to electromagnetic interference (EMI), which is interfering electromagnetic energy (EM) emitted from sources such a radio stations, TV stations, amateur radio (HAM) transmitters, two-way radios, and cellular phones. - Page 7 SEREN Instruction Booklet 1. Do not operate hand-held transceivers (transmitters-receivers), such as citizens band (CB) radios, or turn ON personal communication devices, such as cellular phones, while the power chair is turned ON; 2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them;...
-
Page 8: Safety Warning And Instruction Labels
SEREN Instruction Booklet SAFETY WARNING AND INSTRUCTION LABELS Warning Sticker 1.Please read the instruction Booklet carefully before using your Power Chair. 2.Keep the power chair properly maintained 3.Do not drive the power chair on slippery surfaces or on slopes over 6 degrees limit. 4.Do not drive on highway, crowded roads, or unfamiliar areas. -
Page 9: Product Overview
SEREN Instruction Booklet PRODUCT OVERVIEW Before attempting to drive this scooter on your own, it is important that you familiarize yourself with the controls, and how to operate them. Intended use : The Drive DeVilbiss Power Chair provide a means by which a disabled occupant i.e. - Page 10 SEREN Instruction Booklet JOYSTICK： •Self Diagnostic Warning Lights Flashing of lights indicates there is a problem within power chair. See section 2.1.8, 2.1.9 and 3 for more information. •Battery Gauge There are eleven LED lights on joystick. When all LED lights are on, batteries are fully charged;...
-
Page 11: Operating Your Power Chair
SEREN Instruction Booklet OPERATING YOUR SCOOTER Before beginning your journey with your new power chair, make sure power chair is on a level surface and clear of any obstacle. Although your power chair is able to climb slopes, it is safer to practice on a levelled surface. 1.Before operating with your power chair, check the following: •free-wheeling lever is on D. - Page 12 SEREN Instruction Booklet (B). Seat's Depth Adjustment By releasing fixation screws from back sides, and adjust to a comfortable position, then tighten with fixation screws. (C). Backrest Angle Adjustment By pulling the fixation vel-cro backwards to disengage the pins from the holes, and adjust angle to a comfortable position, then release fixation vel-cro to engage to it's position.
- Page 13 SEREN Instruction Booklet Other Operating Information： Hill climbing : You may need to use a higher speed. For a higher speed, turn speed dial Down slopes : Proceed with downward, slope slowly, and turn speed dial counter clockwise. This enables good control when speed is set in slower motion. However, your power chair will not self accelerate down hills due to automatic braking, taking effect should you attempt to drive too fast.
-
Page 14: Gbk54030 Linx Le System Installation
SEREN Instruction Booklet... - Page 15 SEREN Instruction Booklet 1 Installation procedure 1. First read and fully understand this manual. 2. Mount all the electrical parts of the wheelchair system (motors, park brakes, batteries, Power Module, Remote) on the wheelchair to identify physical dimensions. 3. Do not connect any cables before all the parts of the electrical system are mounted. 4.
- Page 16 SEREN Instruction Booklet 2.1.2 Emergency stop If the user needs to stop the wheelchair quickly, the Power button can be pressed to perform an EMERGENCY STOP. The wheelchair will come to a halt quickly; the rate is set by the Emergency Deceleration parameter.
- Page 17 SEREN Instruction Booklet 2.1.6 Controlling maximum speed The speed dial allows the user to limit the maximum speed of the wheelchair (that is, the speed when the joystick is fully deflected) to suit their preference and environment. High The dial offers 10 discrete steps between the lowest speed (dial Figure 24 The speed dial set to the left) and the highest speed (dial set to the right).
- Page 18 SEREN Instruction Booklet 2.1.8.2 High voltage warning A high voltage warning is indicated by all LEDs on, and the green LEDs flashing. This occurs when the battery voltage level has risen above the high voltage warning set-point. Figure 29 High voltage warning 2.1.8.3 Low voltage warning A low voltage warning is indicated with the left-most LED flashing.
- Page 19 SEREN Instruction Booklet 2.1.10 The XLR charger connector The XLR charger connector, which is located on the right-hand side of the Remote, is used to connect to either a battery charger or the LiNX Access Key. Figure 33 The XLR charger connector See also: 2.2 Battery charging Warning:...
- Page 20 SEREN Instruction Booklet 2.2 Battery charging Plug the battery charger into the Remote's XLR socket. The Battery Gauge will indicate the system is being charged by cycling between a left-to-right chase sequence, and then displaying the approximate battery charge state at the end of the chase sequence.
-
Page 21: Disassembling / Re-Assembling Your Power Chair
SEREN Instruction Booklet DISASSEMBLING / RE-ASSEMBLING YOUR POWER CHAIR Taking apart your power chair enables you to save space when keeping it in storage or carrying it along in your vehicle. Powerchair disassembly does not require specialist tools Joystick Cable Removal： Please follow instructions below to remove joystick cable (M) from armrest. -
Page 22: Charging The Batteries
SEREN Instruction Booklet CHARGING THE BATTERIES Your Drive DeVilbiss power chair is equipped with two, service free 12V.36Ah rechargeable batteries and one 24V/5A off-board charger. Batteries must be charged before using power chair for the first time and it is recommended to be charged up to 8 - 14 hours after each day's use. -
Page 23: Care And Maintenance
SEAT AND ARMRESTS : The seat material used by Drive DeVilbiss Healthcare is of high quality and will remain in good condition for many years if treated responsibly. Using a damp cloth helps clean the upholstery greatly. - Page 24 SEREN Instruction Booklet Other Problems： •Power chair will not move when power is turned on : 1.Check Battery Gauge on joystick. All LED lights should be on. 2.Check Self-Diagnostic Warning Light. It should be steady; if it is flashing, see the chart in section 3 for problem identification.
-
Page 25: Technical Specifications
SEREN Instruction Booklet SPECIFICATION Seat Type Padded, Breathable Ballistic Nylon Back Rest Overall Length 995 mm / 39" Overall Width 610 mm / 24" Overall Height 930 mm / 37" Wheels Front 155 mm / 6" Wheels Middle 260 mm / 10" Wheels Rear 155 mm / 6"... - Page 28 Nithsdale Wheelchairs Dealer Stamp Drive DeVilbiss Healthcare Ltd. Sidhil Business Park, Holmfield, Halifax, West Yorkshire, HX2 9TN, Great Britain Tel: 0845 0600 333 Fax: 0845 0600 334 Email: info@drivedevilbiss.co.uk...
Need help?
Do you have a question about the drive Seren and is the answer not in the manual?
Questions and answers