Table of Contents
Advertisement
2
WARNING
:
SHOCK HAZARD·DO NOT OPEN
AVIS:RISOUE
DE
CHOC
ELECTRIOUE·NE PAS OUVRIR
This
symbol is
to
alert the
user
to
the
presence
of
uninsulated dangerous
voltages
inside
the
product's enclosure
that
may
constitute a
risk
of electric shock.
This
symbol
is to
alert the user
to
important
operating
and maintenance
(service)
instructions
in this
manual and
literature
accompanying
the
product.
APPLICABLE FOR USA, CANADA OR WHERE
APPROVED FOR THE USAGE
CAUTION:
TO PREVENT ELECTRIC
SHOCK,
MATCH WIDE BLADE
OF
PLUG
TO
WIDE
SLOT.
INSERT
FULLY.
ATTENTION: POUR
EVITER LES
CHOCS
ELECTRIQUES,
INTRODUIRE
LA
LAME
LA PLUS LARGE
DE
LA FICHE
DANS
LA BORNE
CORRESPONDANTE DE LA
PRISE ET
POUSSER JUSQU AU
FOND.
This Class B digital apparatus complies with
Canadian
ICES-003.
-
-
-- - - - - - - - - - -
--
Ce t appareil numerique de la classe B est
conlorme
ii
la norme NMB-003 du
Canada.
NOTE: This symbol is applied for the Processor and
Tuner.
This symbol
means that
this unit
is double
insulated. An earth
connection
is not required.
NOTE: This symbol is applied for the double insulated
models.
-
Rotel products
ore designed lo
comply with
international
directives
on the
Restriction
of
Hazardous
Substances (RoHS) in electrical and
electronic equipment ond the
disposal of Waste
Electrical
ond
Electronic Equipment
(WEEE). The
crossed
wheelie
bin
symbol indicates
compliance and
that
the
products
must be appropriately
recycled or processed
in
accordance
with
these
directives.
CLASS 1
LASER PRODUCT
APPAREIL LASER
DECLASSE
1
IMPORTANT FOR LASER PRODUCT
1.
ClASS 1 lASER PRODUCT
2.
DANGER:
Visible
laser
radiation when
open and
interlock
foiled
or bypassed.
Avoid direct exposure to beam.
3.
CAUTION:
Do
not open the
lop
cover.
There are no
user
serviceable
ports
inside
the
player;
leave all
servicing to
qualified
service
personnel.
WARNING!
To
reduce
the risk of
electrical
shock,
fires,
etc.:
1.
Do not remove
screws,
covers
or cabinet.
2.
Do
not expose the unit to rain
or
moisture.
3.
Do
not touch
the power
cord
or plug
with wet hands.
NOTE: This symbol
is
applied for the CD Player.
Pin
Assignments
Balanced
Audio
(3 pole
XLR):
Pin 1: Ground/
Saeen
Pin
2:
In phase/
+ve /
Hot
Pin 3: Out of phase/
-ve /
Cold
NOTE: This symbol is applied for the models with Balanced Inputs
and Oulputs.
· . : ~11
•
0
11~
{L
NOTE: This symbol is applied for
the models with ventilation slots in
the top and bottom covers.
NOTE: This symbol is applied for
the models WITHOUT ventilation
slots in the top and bottom covers.
NOTE: This symbol is applied for
Custom lnslallation amplifiers
en·
gineered with
no
top/bottom rack
mounting clearance requirements.
English
NOTICE:
The RS232 connection should be handled by authorized
persons only.
WARNING:
There are no user serviceable parts inside. Refer
all servicing lo qualified service personnel.
WARNING:
To reduce the risk of fire or electric shock, do not
expose the unit to moisture or water. Do
not
expose the unit to
dripping or splashing. Do not place objects
filled
with liquids,
such as vases, on
the
unit. Do not allow foreign objects to get
into
the
enclosure. If the unit is exposed to moisture, or a foreign
object gets
into
the
enclosure, immediately disconnect the
power
cord
from the wall. Take the unit lo a qualified service person for
inspection and necessary repairs.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use
this
apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's
instructions.
Do not install near any heal sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat. Do not defeat the safety purpose of the polarized
or grounding-type plug.
A
polarized plug has two blades with one wider than the other.
A
grounding type plug has two blades and a third grounding prong.
The wide blade or the third
prong
are provided for your safety.
If
the provided plug
does
not lit
info
your outlet, consult an electrician
for replacement of
the
obsolete outlet.
Protect the power cord from being walked on or pinched porticularly
at plugs, convenience receptacles, and the point where
they
exit
from the apparatus.
Only use attachments/ accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, o r ( & )
table specified
by
the manufacturer, or sold with the
•
•
'f:\,
i
apparatus. When a earl is used, use caution when
~8.
moving the cart/ apparatus combination to avoid
:a-·
·
injury from tip-over.
Advertisement
Table of Contents
