Lan Unit - Sharp Actius PC-UM20 Operation Manual

LAN unit

You can connect to a LAN (Local Area Network) with the 100 Base-TX/10 Base-T
LAN unit on your computer. To activate the LAN unit, perform the following steps.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 only when connecting to 100 BASE-TX
LAN.
Connect your computer to LAN
1. Turn off the computer.
2. If your computer is provided with the LAN cable, go to the step 4. If with the
core for a LAN cable, go to the next step.
3. Attach the provided core to one end of your LAN cable. Insert the cable into
the core and close the core until it clicks.
4. Remove the cover of the LAN jack on the right side of your computer.
5. Connect the core end of the LAN cable into the LAN jack.
Do not connect the LAN cable to the modem jack next to the LAN jack. It
will damage the LAN cable and the modem jack.
6. Connect the other end of the LAN cable into the network hub.
Modem Jack
LAN Jack
5
5-5