Sharp Actius PC-UM20 Operation Manual page 80

2. Remove the cover of the modem jack on the right side of your computer.
To avoid damaging the modem, keep the modem cover, and attach it after
you finish using the built-in modem.
3. Connect one end of the included modem cable to the modem jack.
Do not connect the modem cable to the LAN jack next to the modem jack.
It may damage the LAN jack or the modem cable.
4. Connect the other end of the modem cable to the telephone line.
5
5. Turn on the computer.
Connect the modem to the telephone line directly. Do not use a
distributor or allotter.
Configuring the Modem in Windows 2000
Make the necessary adjustments as shown below.
1. From the Start menu, select Settings - Control Panel.
2. Double-click the Phone and Modem Options icon.
3. Select New Location and click Edit.
4. Type in the details about your location and dialing properties and click OK.
5. Even after you set one dialing property, you can make another new dialing
property by clicking New ... and typing a suitable name in Location name.
5-2
Modem Jack
LAN jack
To Telephone Line