Waste Disposal; Bartscher Gmbh - Bartscher A190.043 Instruction Manual

Hide thumbs Also See for A190.043:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

PROBLEM
The device is turned
on, the brewing
indicator does not
come on and hot water
does not flow out.
When turned on a
fuse immediately
burns out.
The above described problem cases are given for orientation and as examples.
Should these or similar problems occur, please turn off the machine immediately
and don´t use it anymore. In order to check and repair your machine, please
contact a qualified expert or the manufacturer immediately.

8. Waste disposal

Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!

Bartscher GmbH

Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
CAUSE
Control panel is
damaged
Damaged filling switch
Short-circuit
For the disposal of the device please consider and
act according to the national and local rules and
regulations.
REMEDY
Contact the seller
Contact the seller
Contact the seller
phone: +49 (0) 5258 971-0
fax:
+49 (0) 5258 971-120
- 35 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Contessa 1002

Table of Contents