Cleaning; Assembly - Oliver 4430.201 M-4430 Owner's Manual

Cleaning

To prevent rusting, the cast iron bed and
extension tables of this planer are covered with
machine oil and plastic film. Remove the plastic
film, then wipe off the machine oil with paper
towels or rags.
Once all the machine oil is removed, routinely
coat the unpainted cast iron surface with rust
preventive such as Boeshield® T-9 or paste wax.
Do not use rust preventives that contain silicone,
which is known to interfere with certain finishes
and glues.

Assembly

This planer is mostly assembled in the factory. There are a few more items to set up before the machine
is ready for a test run:
1. Install height adjustment handwheel.
2. Install the dust hood.
3. Install extension tables.
4. Install the power switch.
5. Connect planer to a dust collection system.
6. Connect the planer to a power source.
The approximate time for cleaning and assembly is approximately 60 minutes.
22 | Page Oliver Machinery 4430 Planer