15" Planer; Unpacking And Cleaning; Moving The Planer - Oliver 0015 Owner's Manual

15" PLANER

Thank you for choosing this planer.
This unit is carefully tested and inspected before
shipment and if properly used and maintained, will
provide you with 1 year of reliable service. To
ensure optimum performance and trouble free
operation a reasonable amount of care and
attention is required.
To get the most from your new planer, please take
the time to read this manual before assembling,
installing and operating the unit.

UNPACKING AND CLEANING

To ensure maximum performance from your 15"
planer, clean it properly; and install it accurately
before use. As soon as you receive the planer, we
recommend you follow these procedures:
1. Finish removing the contents of the shipping
carton and compare with the contents list.
2. Report damage, if any to your local distributor.
3. Clean all rust protected surfaces with a mild
solvent or kerosene. Do not use lacquer thinner;
paint thinner, or gasoline. These will damage
painted surfaces.
4. To prevent rust, apply a light coating of paste
wax to surface.
USING A SLING
Please using a sling to carry machine, lifting
handles must be pulled out (Fig.1). Try keeping
sling parallel to machine and hold steady.

MOVING THE PLANER

There are two castors provided at the front bottom
and one caster in rear of the enclosed type stand
for easy movement of the planer.
When moving the planer is required step on the
foot pedal to slightly raise the machine and
conveniently move it. Once the planer has been
moved to its desired location, shift the foot pedal
upward to allow the leveling screws to rest on the
floor for planer stability.
Fig. 1
STOP
Fig. 2
4
MOVEABLE