Product Specifications - DAPAudio DCL-2 Manual

Product Specifications

Model: DAP Audio DCL-2
Power supply: 230 VAC, 50 Hz
Power consumption: 10 W
Analog Inputs
Connectors: XLR or balanced 1/4" jack
Type: RF filtered, servo balanced, 20 KOhm unbalanced
Impedance: 40 KOhm balanced, 20 KOhm unbalanced_Nominal Operating Level: -20dB to +4dB
Input impedance: 40K balanced, 20K unbalanced
Nominal Operating Level: -20 dB to +4 dB
Max. input level: +16 dB at +4 dB nominal level, +2 dB at -20 dB nominal level
Analog Outputs
Connectors: XLR or balanced 1/4" jack
Type: Electronically servo-balanced output stage
Output impedance: 66 balanced, 33 unbalanced
Max. output level: +16 dB at +4 dB nominal level, +2 dB at -20 dB nominal level
System Specifications
Frequency Response: 20Hz to 20KHz, ±1dB
Dynamic Range: >112dB, 20Hz to 20Khz
S/N: >115 dB
THD: <0.065%, @1KHz, 0dB
Compression
Threshold: -61dB to 0dB, 1dB step
Ratio: 1.0 to Limit
Detect Time: 0 - 350dB/Sec
Attack Time: 0 - 100ms
Decay Time: 0 - 350dB/Sec
MIDI Interface
Type: 5-Pin-DIN-Socket
Digital Processing
Converters: 24-bit Sigma-Delta, 64/128-times over-sampling
Sampling Rate: 48KHz
Display: 2x16LCD Display
Dimensions: 482 x 152 x 45 mm (LxWxH)
Weight: 3 kg
Design and product specifications are subject to change without prior notice.
13