Completing The Parts Replacement - Lenovo 30CF User Manual

c. Install the M.2 storage drive.
Figure 71. Installing the M.2 storage drive
d. Lock the M.2 storage drive clip.
Figure 72. Locking the M.2 storage drive clip
6. Reinstall the computer cover and reconnect the cables. For details, see "Completing the parts
replacement" on page 79.

Completing the parts replacement

CAUTION:
After replacing a CRU, reinstall all protective covers, including the computer cover, before connecting
power and operating the computer. This action is important to help prevent unexpected electrical
shock and help ensure the containment of an unexpected fire that could happen under extremely rare
conditions.
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect
cables. Depending on the parts you installed or replaced, you might need to confirm the updated information
in the Setup Utility program. Refer to "Using the Setup Utility program" on page 25.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See "Parts on the system board" on page 4 for the locations of various
components in your computer.
.
Chapter 7 Hardware removal and installation
79