Gaggenau 400 Series Installation Instructions Manual page 5

Inspect the Dishwasher
After unpacking the dishwasher and prior to installation,
thoroughly inspect the dishwasher for possible freight
or cosmetic damage. Report any damage immediately.
Cosmetic defects must be reported within 30 days of
installation.
NOTE: Do not discard any bags or items that come with the
original package until after the entire installation has been
completed.
Hammer
Tape Measure
Torx T-15 Screwdriver
Tools and Materials Needed
Hole Saw
Slot Screwdriver
Pencil
Hot Water Supply Line - Minimum
braided dishwasher supply line
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose)
Pipe Wrench
Phillips Screwdriver
Center Punch
Ø 2 mm ( / in) Drill
1
16
/ " O.D. copper tubing or metal
3
8
Adjustable Wrench
Torx T-20 Screwdriver
Square
Level
5
5