Positioning The Lamp Body - FLOS IC C/W2 Manual

REV. 1
DATE 01/07/2021
IC C/W2 F3179030 EN
RF3160100
KIT WITH SCREWS AND ALLEN KEY
A
A
C
Fig.2
Position the lamp body (C) on the wall attachment and assemble the lamp
body by fastening the 2 screws (A) with the Allen key.
HINTS!!! To carry-out this operation position the lamp body close to the wall
attachment, tilt the body and slightly and tip it slightly to the left, to then fasten
it with a slight clockwise rotation.
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
7
Flos reserves the right to introduce any changes to its own models, without prior notice.