Osd Menu_Setup - Digital Watchdog Star-Light Plus DWC-VA853WTIR User Manual

OSD Menu_Setup

SETUP
1 SET
COMM
2
OUTPUT
LANGUAGE
CAM TITLE
RESET
RETURN
COMM
1
Adjust the camera's ID and Baudrate. Default Protocol is Pelco-D.
-
CAM ID: Provide an ID number for the camera (0 ~ 255).
-
BAUDRATE: 9600bps is the default. Select the baudrate from the following options:
2400/4800/9600/5760~0/115200 bps.
-
CONFIRM: OFF / ON
NOTE: Set "CONFIRM" On, after setting CAM ID / BAUDRATE and be sure to press the "SAVE&EXIT"
button on the EXIT menu.
OUTPUT
2
- FRAME RATE: Set the camera's display frame rate and resolution. Select from:
1080P_30(25), 1440_30P(25), 2160P_15 (12.5).
- FREQ: When the camera's image appears to have flickering issues, change the
value to adjust the image. Select from 60HZ/50HZ.
- ANALOG MODE: Set the camera's Analog Mode. HD-A / HD-T / HD-C / CVBS
- CONFIRM: OFF / ON
NOTE: After adjusting the camera's frame-rate, frequency and analog mode, be sure to set
"CONFORM" on and press "SAVE&EXIT" to save all changes.
CAM ID
ENG
BAUDRATE
OFF
CONFIRM
OFF
RETURN
28
COMM
1 FRAME RATE
9600 FREQ
OFF ANALOG MODE
CONFIRM
RETURN
OUTPUT
2160p 15
60HZ
HD_T
OFF