Calling up the heat amount
Press the following keys:
1.
for the "Main menu".
2.
for "HM".
3. OK
to confirm.
"HM ..."
"Tflow"
"Tretn"
"Heat"
"Heat"
"Heat"
Note
Add the heat values together.
The values are not calibrated.
If there is a power failure, the displayed value showing
the heat amount may be up to 6 hours old.
To reset the heat amount values:
Whilst the value is displayed, press the following keys:
1. OK "Delete?""Yes" is displayed.
2. OK to confirm
Explanation
Flow temperature in °C
Return temperature in °C
Heat amount in Wh
Heat amount in kWh
Heat amount in MWh
4.
for "HM 1" or "HM 2".
5. OK
to confirm.
6.
/
for the following values, subject to system
equipment level.
7.
until the "Main menu" appears.
Scanning options
7