Parts Description; Functional Description; Installing Or Removing Battery Cartridge - Makita DUR189 Instruction Manual

PARTS DESCRIPTION

Fig.4
1 Battery cartridge
5 Auto speed control
indicator
9 Hanger
13 Shoulder harness
FUNCTIONAL
DESCRIPTION
WARNING:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Failure to switch off and remove the battery cartridge
may result in serious personal injury from accidental
start-up.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
2
9
10
11
12
2 Lock-off lever
6 Power lamp
10 Lock sleeve
- -
1
3
5
4
7
13
3 Switch trigger
7 Main power button
11 Handle
- -
Fig.5
► 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
7 ENGLISH
6
8
4 Speed indicator
8 Reverse button
12 Protector (cutting tool
guard)
- -
2
1
3