Makita DUR142L Instruction Manual
Cordless grass trimmer
Hide thumbs
Also See for DUR142L:
- Instruction manual (120 pages) ,
- Technical information (13 pages) ,
- Instruction manual (96 pages)
Related Manuals for Makita DUR142L
Summary of Contents for Makita DUR142L
- Page 1 INSTRUCTION MANUAL Cordless Grass Trimmer DUR142L DUR182L DUR183L 014149 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model DUR142L DUR182L DUR183L Type of pipe Integrated pipe Splittable pipe No load speed 3,500 - 6,000 min Overall length with nylon cutting head 1,843 mm Split length 982 mm Cutting diameter with nylon cutting head... - Page 3 Designation of Machine: especially children, or pets are nearby. Cordless Grass Trimmer Only use the machine in daylight or good Model No./ Type: DUR142L, DUR182L, DUR183L artificial light. Specifications: see "SPECIFICATIONS" table. Before using the machine and after any Conforms to the following European Directives:...
- Page 4 12. Never operate the tool when tired, feeling ill or When battery pack is not in use, keep it away under the influence of alcohol or drugs. from other metal objects, like paper clips, 13. The tool should be switched off immediately if coins, keys, nails, screws or other small metal it shows any signs of unusual operation.
-
Page 5: Save These Instructions
Before starting make sure that the cutting tool 17. Don't force the tool. It will do the job better has no contact with hard objects such as and with less likelihood of a risk of injury at branches, stones etc. as the cutting tool will the rate for which it was designed. - Page 6 If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. Do not short the battery cartridge: Do not touch the terminals with any conductive material. Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
-
Page 7: Table Of Contents
PARTS DESCRIPTION DUR142L DUR183L DUR182L Battery cartridge Switch trigger Speed adjusting dial Guard Indication lamp Wire guard Power button Cutting tool Lock-off lever Shoulder harness Hanger (suspension point) Grip 014160... -
Page 8: Battery Cartridge
Power switch action FUNCTIONAL DESCRIPTION WARNING: WARNING: Before inserting the battery cartridge in the • Always be sure that the tool is switched off tool, always check to see that the switch • and battery cartridge is removed before trigger actuates properly and returns to the adjusting or checking the functions on the tool. -
Page 9: Speed Adjusting Dial
Battery protection system 1. Reversing switch (Lithium-ion battery with star marking) 2. A position depressed for normal operation 1. Star marking 3. B position depressed for weed and debris removal 014159 This tool has a reversing switch which is only provided to change the direction of rotation so that it can be used 012128 Lithium-ion batteries with a star marking are equipped... -
Page 10: Indication Lamp
Indication lamps 1. Battery indicator 2. Power indicator 013836 When the protection system works during the operation, the lamps light up. Refer to the following table for the status and action to be taken for the indication lamp. Power Battery indicator indicator Status... -
Page 11: Power Button
Mounting the attachment pipe Installing the guard Only for model DUR183L WARNING: Never use the tool without the guard illustrated 1. Joint • 2. Lock lever in place. Failure to do so can cause serious 3. Joint cover personal injury. 4. -
Page 12: Lock-Off Lever
Installing the wire guard Installing nylon cutting head NOTICE: CAUTION: Be sure to use genuine Makita nylon cutting head. • Before adjusting the wire guard, wait for the • Turn the tool upside down so that you can replace the cutting head comes to standstill. -
Page 13: Hanger (Suspension Point)
Only for model DUR183L MAINTENANCE 1. Cap WARNING: Always be sure that the tool is switched off • and battery cartridge is removed before attempting perform inspection maintenance on the tool. Failure to switch off and remove the battery cartridge may result in serious personal injury from accidental start-up. - Page 14 To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 013824 Hook the middle of the new nylon cord to the notch located at the center of the spool between the 2 channels provided for the nylon cord.
-
Page 15: Trouble Shooting
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. Malfunction status... - Page 16 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nylon cutting head • Nylon cord (cutting line) • Shoulder harness •...
- Page 20 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885230A228...