Original Placement; Using The Document Glass - Sharp AL-1642CS Operation Manual

• If you start a print job while a copy job is in progress, the print job will
begin when the copy job is completed.
• The scanning function cannot be used while a copy job is in progress.
About interrupt copying
If you press the start (
tray 1, paper tray 2 or multi-bypass tray is in progress, the copy job will begin
automatically after the print data in the unit's memory is printed (interrupt copying).
When this is done, the print data remaining in the computer is not sent to the unit.
When the copy job ends, press the clear (
once to change the unit to the online state (p.31), or wait until the set auto clear time
(p.55) elapses. The remaining print data will be sent to the unit and printing will
resume.

ORIGINAL PLACEMENT

Using the document glass

• The document glass can read up to 8-1/2" x 14" original.
• Image loss 5/32" (4mm) can occur at the leading and trailing edges of
the copies. Also image loss 11/64" (4.5mm) in total can occur along
the other edges of the copies.
• When copying a book or an original which has been folded or a
crumpled original, press down the SPF lightly. If the SPF is not
securely closed, the copies may be striped or blurred.
1
Open the SPF, and place the original.
2
Place an original face down on the document glass. Align it
with the original scale and the centering (
the SPF.
Original scale
) key to begin a copy job while a print job using the paper
mark
) key twice, or press the ON LINE key
) mark. Gently close
5
47