Drum Cartridge Replacement - Sharp AL-1642CS Operation Manual

4
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The indicator
(
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.

DRUM CARTRIDGE REPLACEMENT

The useful life of the drum cartridge is approximately 18,000 copies*. When the
internal counter reaches approximately 17,000 copies, the drum replacement required
( ) indicator will light up indicating that replacement of the drum cartridge will be
needed soon. For more information on purchasing the drum cartridge, see "ABOUT
SUPPLIES AND OPTIONS" (p.70). When the indicator begins to blink, the unit will
stop operating until the cartridge is replaced. Replace the drum cartridge at this time.
*Based on copying onto letter size paper at 5% toned area.
Do not remove the protective cover on the drum portion (black paper) of
a new drum cartridge before use. The cover protects the drum against
external light.
1
Remove the TD cartridge (see step 1 and 2 in "TD CARTRIDGE
REPLACEMENT" (p.57)).
2
Hold the drum cartridge handle and
gently pull the cartridge out. Dispose
of the old drum cartridge in
accordance with local regulations.
3
Remove the new drum cartridge from
the protective bag and remove the protective cover from the
cartridge. Then gently install the new drum cartridge.
58
) will go out and the start (
Do not touch the surface of the drum (green portion) of the
cartridge. Doing so may cause smudges on the copies.
) indicator will light up.
Drum cartridge handle