Sharp AL-1642CS Operation Manual page 41

Using the SCANNER key to begin scanning
• Scanning is not possible during a copy job.
• If the SCANNER (
be stored.
• When scanning an original that has been placed in the SPF, only one
original can be placed unless you are using Sharpdesk.
1
Press the SCANNER (
The unit enters scan mode.
2
Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
3
Press the right copy quantity key to
display the number of the application that
you wish to use for scanning.
The application numbers are initially as follows.
Application
number
SC1
SC2
SC3
SC4
SC5
SC6
To check the settings, see "Scan Button Destination Setting Dialog Box"
(p.36) and then open the settings window of the Button Manager.
) key is pressed during a print job, the scan job will
) key.
Application launched
Sharpdesk (Full color) (if installed)
Sharpdesk (Monochrome) (if installed)
E-mail (your standard e-mail program in the
Windows OS you are using)
Fax (if a fax program is installed)
OCR (if an OCR program is installed)
Microsoft Word (if installed)
4
39