Hands-Free Features; Troubleshooting - Plantronics Explorer 230 User Manual

Hands-Free Features

If your phone and your wireless service provider both support hands-free
operation, you can use the following features:
Redial the last number To activate last number redial, double press
the call control button. You will hear a low
tone after each double-key press.
Using Voice Dialing With the headset on, press the call control
button for 2 seconds to activate the voice
dialing.
NOTE
voice-dialing feature must be enabled on
your phone. See your Bluetooth phone
manual for instructions.
Reject a call When receiving an incoming call, press the
call control button for 2 seconds to reject
the call.
10
To use voice-activated dialing, the
My headset Headset was not in pairing mode when mobile
does not work phone menu selections were made. See page 5
with my phone. "Pairing Your Headset."
Incorrect menu selections were made on
your mobile phone. See page 5 "Pairing Your
Headset."
I did not enter Your phone did not locate the headset.
my passkey.
Repeat the pairing process on page 5.
Incorrect menu selections were made on your
mobile phone. Repeat the pairing process on
page 5.
Callers cannot hear The headset is not turned on. Press the call
me, or I cannot control button for 2 seconds until you hear a
hear caller/dialing beep or see the indicator light glow blue to turn
tone. headset on.
Your headset is out of range. Move the headset
closer to the phone or Bluetooth device.
Your headset battery is drained. Charge your
battery using the AC power adapter supplied.
The listening volume is too low. Press the volume
key up (toward the ear loop) to increase the
sound heard in the headset.

Troubleshooting

11