Sharp AL-1220 Operation Manual page 25

TWO-SIDED COPYING
Replace the first original with the second original on the original table and close the
2
original cover. Make sure that the first and second originals are oriented in the same
way on the original table.
For tablet binding, turn the first copy over left to right as shown below. For booklet
3
binding, turn the first copy over top to bottom (not shown). Feed the first copy into the
bypass tray.
3
Press the tray select (
4
24
Both the first and second originals can be set in the SPF but they must be set
separately. If the stream feeding mode for the SPF has been enabled, set the
second original after the SPF ( ) indicator goes out. See page 20.
Be sure to feed the copy paper one sheet at a time.
) key to select the bypass tray and press the print (
B
) key.