Stream Feeding Mode; Exposure Adjustment/Photo Copying - Sharp AL-1220 Operation Manual

NORMAL COPYING
Press the print (
5
3

Stream feeding mode

The stream feeding mode allows easy operation of continuous copying from the SPF.
If the stream feeding mode has been enabled using user program No.4, the SPF ( ) indicator
will blink approximately 5 seconds after printing of all copies from the SPF is complete. While
this indicator is blinking, any new originals placed in the document feeder tray will be fed and
copied automatically. If the stream feeding mode has been disabled, the print (
be pressed each time the originals are set even immediately after completion of a copy run
from the SPF. The default setting of the stream feeding mode is "ON". See page 26, USER
PROGRAMS.

EXPOSURE ADJUSTMENT/PHOTO COPYING

Copy density adjustment is not required for most originals in the automatic exposure mode. To
adjust the copy density manually or to copy photographs, the exposure level can be adjusted in
five steps manually.
Set the original and check the copy paper size.
1
Press the exposure mode selector key to select the manual (
2
(
20
) key.
To display the number of copies made in a continuous run, press the left
copy quantity key.
To stop copying in the middle of a run, press the clear (
stop and the number in the display will be reset to "0".
) mode.
) key. Copying will
) key must
) mode or photo