Automatic Fault Warnings And What To Be Done - Heinner HWM-V7012D++ User Manual

www.heinner.com
XII. AUTOMATIC FAULT WARNINGS AND WHAT TO BE DONE
Your machine is equipped with the systems which are capable of both taking necessary
precautions and warning you in case of any breakdown by means of continuous
self-check-ing during washing operations.
TROUBLE CODE POSSIBLE FAULT
The door of your machine is
left open
The water pressure or the
water level inside
machine is low
The pump is faulty or pump
filter is clogged or electrical
connection of the pump is
faulty
Your machine has excessive
amount of water
7Kg, 220-240V~50Hz, 1200rpm
WHAT TO DO
Close the machine door. If your
machine persists to indicate fault,
turn off your machine, unplug it
and contact the nearest authorised
service immediately.
Turn on the faucet. Mains water
the may be cut-off. If the problem still
continues, your machine will stop
after a while automatically. Unplug
the machine, turn off your faucet
and contact the nearest authorised
service.
Clean the pump filter. If the
problem persists,
nearest authorised service.
Your machine will discharge water
by itself. Pursuant to discharging
operation, turn off your machine
and unplug it. Turn off your faucet
and contact the nearest authorised
service.
contact the
38