Intrusion Switch; Removing The Intrusion Switch - Dell OptiPlex 5080 Service Manual

Steps
1. Slide the power-supply unit into the chassis until the securing tab snaps into position.
2. Replace the three (#6-32) screws to secure the power-supply unit to the chassis.
3. Route the power cable through the routing guides on the chassis and connect the power cables to their respective
connectors on the system board.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Intrusion switch

Removing the intrusion switch

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan duct.
About this task
The following images indicate the location of the intrusion switch and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly 57