Front Bezel; Removing The Front Bezel - Dell OptiPlex 5080 Service Manual

Steps
1. Locate the side cover slot on your computer.
2. Align the tabs on the side cover with the slots on the chassis.
3. Slide the side cover towards the front of the computer to install it.
4. Tighten the thumbscrew (#6-32) to secure the side cover to the computer.
Next steps
1. Follow the procedure in

Front bezel

Removing the front bezel

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
Steps
1. Pry the retention tabs to release the front bezel from the computer.
18 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.