Table of Contents
Advertisement
DSL-2650U/NRU
5. For the PPPoE and PPPoA connection types, enter authorization data
provided by your ISP in the PPP Settings section (the username (login)
in the PPP Username field and the password in the Password and
Password confirmation fields). If these data have not been provided
by your ISP, select the Without authorization checkbox.
6. Deselect the NAT checkbox in the Miscellaneous section if your ISP
requires you to disable the network address translation function.
7. Click the Save button.
Ethernet WAN Connection
1. Go to the Advanced / Interface grouping page.
2. Select the choice corresponding to the LAN port that will be used as the
WAN port of the Ethernet WAN port radio button, and click the Save
button.
3. Go to the Net / Connections page and click the Add button.
4. In the General settings section, specify a name for your connection
(any name for easier identification) in the Name field and select a type
for your connection from the Connection Type drop-down list (for the
Static IP and DHCP connection types select the IPoE value).
Quick Installation Guide
11
Advertisement
Table of Contents
