Garland XTRIM 900 PG Instruction Manual page 35

8. MAINTENANCE AND SERVICE
It is necessary to always turn off the engine and
check that the cutting tool is stopped before cleaning,
transporting or modify the cutting tool.
Before performing any maintenance or repair the
machine make sure the engine is off and remove the
spark plug cap.
WARNING! Do not modify the machine or change
the cutting elements. An inadequate use of these
elements can cause serious personal damages and
can even be fatal.
Keep clean the machine, especially the fuel tank area
and areas near the air filter.
Never try adjustments in the machine if it is running
and / or attache to the user by the harness. Perform
all maintenance of the machine when is set on a flat
and clear surface.
Use only suitable spares to get a proper performance
for this machine. This replacement can be found on
the official distributor of the machine. Using other
sparks may causes risks, damage to the user or
people around the machine.
Carburetor adjustment is complicated and
should be done only by the service.Carburetor
regulation is complicated and should only be carried
out by a service agent. An incorrect regulation of the
carburetor can cause damages to the engine and is
sufficient motive to cancel the warranty.
The removal of security devices, an improper
maintenance, the substitution of elements with non
original elements can cause corporal damages.
8.1. PERIODIC MAINTENANCE
Make periodic inspections of the machine to
ensure that the machine is correct. For a thorough
inspection take the machine to your dealer.
Use only suitable spares to get a proper performance
for this machine. This replacement can be found on
the official distributor of the machine. Using other
sparks may causes risks, damage to the user or
people around the machine.
The use of non original spare parts and accessories
can cause accidents, personal damages to the user
and breakage of the machine.
Carry out maintenance work based on the following
table:
Each 2
Operation
deposits
Air filter
Petrol filter
Spark plug
Cylinder fins
8.1.1. AIR FILTRE
The dirt in air filter will cause a reduction in machine
performance. Check and clean this element. If you
notice damage or alterations replace it with a new
filter.
1. Remove the protecting cover.
2. Remove the filter.
3. The dust accumulated on the outside of the filter
can be removed using your hands or against a
hard object.
35/124
Each 10 petrol
petrol
deposits
•
•
•
English
Once a
year
•