Technical Data; Installing The Appliance; Transportation, Unpacking; Cleaning - Zanussi ZNB 404W Instruction Book

Technical Data

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/24h)
(kWh/year)
Energy class, according to EU standards
Freezing capacity (kg/24h)
Rising time (h)
Rated current (A)
Noise Lc (dB)
Weight (kg)
Number of compressors

Installing the appliance

Transportation, unpacking

The appliance and the interior fittings are protected for
transport.
Remove all packaging and any adhesive tape.
Any remnants of adhesive can be removed using
white spirit.
After transportation the appliance must not be
switched on for 2 hours. This is to allow the refriger-
ant to settle.

Cleaning

Clean the accessories and the inside of the appliance
with warm water and bicarbonate of soda (5 ml
to 0.5 litres of water). Rinse and dry thoroughly.
Do not use detergents, abrasive powders, highly per-
fumed cleaning products, wax polishes or cleaning
products containing bleach or alcohol.
Ins tr uctions f
Ins tr uctions f
ZNB 404 W ZNB 404 S
Refrigerator:
Refrigerator:
or the Ins
or the Ins
251
Freezer: 122
240
Freezer: 109
595
2010
632
1,12
409
A
10
16
0,6
42
77
1

Location

The appliance should be positioned in a well ventilated,
dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore:
not be installed next to radiators, cookers or other
sources of heat
only be installed at a location where the ambient tem-
perature corresponds to the climate classification,
for which the appliance is designed.
The climate classification can be found on the rating
plate.
The following table shows which ambient temperature is
correct for each climate classification:
Climate Classification
SN
ST
t aller
t aller
Ambient Temperature
+10 to +32 °C
N +16 to +32 °C
+18 to +38 °C
13