Switch And Indicator Set; Display Background Colour; Using The Appliance; Putting It Into Use - Zanussi ZNB 404W Instruction Book

Switch and indicator set

The following components can be found under a cover in
the top frame:
A. Button ON/OFF
Switches the appliance on and off.
B. Fridge temperature display
By default it shows the medium temperature inside
the refrigerator. Should the temperature be higher
than 9 °C, a "-" sign is shown. Should the tempera-
ture be definitely lower than 0 °C, a flashing "-" sign
is shown.
It shows the desired fridge temperature by a flashing
number when one of the fridge temperature setting
buttons is pressed. After a while it returns to the actu-
al temperature.
It can show an "A" symbol when the appliance in
action cool mode. See also the chapter on using the
refrigerator.
It can show an "H" symbol when the appliance is in
holiday mode. See also the chapter on holiday
mode.
C. Fridge temperature setting button (for colder
temperatures)
Press this button to make the desired fridge temper-
ature colder by 1 °C.
D. Fridge temperature setting button (for warmer
temperatures)
Press this button to make the desired fridge temper-
ature warmer by 1°C.
E. ACTION COOL button
Press this button to activate the action cool mode.
See also the chapter on using the refrigerator.
F. ACTION COOL function "on" indicator (yellow)
This indicator is lit when the appliance is in action
cool mode. See also the chapter on using the refrig-
erator.
G. Freezer temperature display
By default it shows the highest temperature inside the
freezer.
It shows the desired fridge temperature by a flashing
number when one of the freezer temperature setting
buttons is pressed. After a while it returns to the actu-
al temperature.
6
It can show an "A" symbol when the appliance in
action freeze mode. See also the chapter on freezing.
H. Freezer temperature setting button (for colder
temperatures)
Press this button to make the desired freezer temper-
ature colder by 1 °C.
I. Freezer temperature setting button (for warmer
temperatures)
Press this button to make the desired freezer temper-
ature warmer by 1 °C.
J. ACTION FREEZE button
Press this button to activate the action freeze mode.
See also the chapter on freezing.
K. ACTION FREEZE function "on" indicator (yellow)
This indicator is lit when the appliance in action freeze
mode. See also the chapter on freezing.
L. Alarm reset button
M. Alarm light (red)
In the event of an abnormal temperature rise inside
the freezer (e.g. powercut) this warning light will start
to flash and a buzzer will sound.
After the temperature has returned to normal, the
warning light will continue to flash, although the
buzzer has stopped.
If the alarm button is pressed, the freezer temperature
display shows for a few seconds the warmest temper-
ature reached in the section. The buzzer, if sounding,
will switch off.
This warning light will start to flash and a buzzer will
sound in case of a door left open. To stop the alarm
light simply close the door.
Handling the appliance

Putting it into use

Place the accessories into the appliance then plug to the
mains socket.
To start the appliance, press the ON/OFF button ("A").
The fridge temperature display ("B") and freezer tempera-
ture display ("G") will go on. The alarm light ("M") flashes
since the temperature is high. The buzzer sounds. To stop
the buzzer, press the alarm reset button ("L").
Note:
The appliance cannot be switched on or off if unplugged,
or if there is no power being supplied to it. Following con-
nection to the mains power supply, the appliance returns
to the same operating state as before the interruption of
main power.