Hot Starting - Hyundai HSDT55 Original Instructions Manual

Starting / Stopping the machine
Cold start
1. Turn the switch to position I.
2. Move the choke lever to the CLOSE position (B).
2. Pump the fuel by pressing the priming pump (C) 10 times.
5. Pull the starter grip 4-6 times, until the engine starts (D).
6. Move the choke lever to OPEN position (E).
6. Press the lock button and then the trigger

HOT STARTING

1. Move throttle lever to idle detent position, move the stop switch to "I" position
2. Then push the chock level on the OPEN position.
3. Pull recoil starter handle and engine should start.
STOPPING ENGINE
Release the joystick, let the machine idle. Then press the switch to stop the machine.
Blower operations
1. Use the blower for trees, shrubs, flower beds, and hard-to-clean areas.
2. Use the unit around buildings and for other normal cleaning procedures.
3. Use the blower around walls, overhangs, fences, and screens.
WARNING: Because of flying debris, always
use approved shielded safety glasses or a face
operating the blower.
(F) to start the operation.
WARNING: DO NOT operate the blower with other
people or animals in the immediate shield when
vicinity. Allow a minimum of 50 feet (15 meters)
between operator and other people or animals.
10