barbas BOX 40 Installation Instructions & Manual For Annual Maintenance page 21

Table of Contents

Advertisement

BOX 40
Outside appliance:
Clean the outside of the appliance with a dry lint free cloth.
Wait for the appliance to cool down suffi ciently before cleaning. Never use
scouring powder, aggressive cleaners or fi re polish on the appliance.
Any lacquer damage can be repaired with a BARBAS heat resistant paint spray
can. (Pay atention that the appliance is suffi ciently cooled down !)
...
Ventilation house:
Check whether the room where the appliance is installed is suffi ciently
ventilated according to national and local regulations and standards.
Ensure that as little dust, and as few particles of cigarette smoke, candles and
oil lamps as possible pollute the air in the room in which the appliance is used
Heating of these particles
discoloration of the walls and
that the room in which the appliance is located is suffi ciently ventilated.
Last check appliance:
In reversed order, place back all parts in the appliance.
Place back the door on the appliance.
Check the correct operation from the sliders and fl aps. See Chapter 2.3:
Preparation / Function check.
General:
Parts:
Individual parts for replacement/accessories are available from your BARBAS
dealer. Use only original parts.
Modifi cations:
Introduced modifi cations to the appliance are not permitted.
Installation instructions
by the burning
of the appliance could lead to
ceiling. It is therefore very important to ensure
21

Advertisement

Table of Contents
loading

Table of Contents