Iwds Security Setup - IOGear GWU637 User Manual

USER'S MANUAL OF WLAN BROADBAND ROUTER
MAC Address
Data Rate
Comment
Apply Changes
Reset
Set Security
Show Statistics
Delete Selected
Delete All
Reset
I
Fill in the MAC address of AP to register the wireless
distribution system access capability.
Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 1M to 54Mbps or MCS.
Fill in the comment tag for the registered AP.
Click the Apply Changes button to register the AP to new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
Click button to configure wireless security like
WEP(64bits), WEP(128bits), WPA(TKIP), WPA2(AES)
or None
It shows the TX, RX packets, rate statistics
Click to delete the selected clients that will be removed
from the wireless distribution system.
Click to delete all the registered APs from the wireless
distribution system allowed list.
Click the Reset button to abort change and recover the
previous configuration setting.
WDS Security Setup
Requirement: Set [Wireless]->[Basic Settings]->[Mode]->AP+WDS
This page is used to configure the wireless security between APs.
Refer to 3.3.6 Wireless Security Setup.
Version: 1.0
22