Page 1
SWITCHMATIC 1 / 1 plus SWITCHMATIC 2 / 2 plus SWITCHMATIC 3 / 3 plus ADVANCED SETTINGS Risk of damaging the pressure assemblies and/or the plant. Risk by electric shock. Risk for people and/or objects.
2. DESCRIPTION (diagram A) is pressurized. SWITCHMATIC 1 is an electronic pressure switch with integrated digital manometer. It manages the start and stop of a single-pha- 6. ELECTRIC CONNECTION (diagram B) se pump up to 2.2kW (3 HP) (SW1-2).
P-BUT- 9. BASIC MENU (diagram C) TOUCH ACTION - Press simultaneously during 5 seconds. From state ON: unit OFF. - By mean of the values can be changed. From state OFF: the pump starts and - Press for validation. click! keeps operating until reaching Pstop.
SYSTEM REACTION SET- pressure because the ow requirement is excessive. In this TING case SWITCHMATIC 1/3 would activate a alse dry-running Select the operation MODE as a con- alarm. ventional pressure switch (nc = norma- I these concepts are not clear, it is preerable not congure...
0-999 15. EC STAMENT OF COMPLIANCE A11 xxx Number of A11 alarms. 0-999 COELBO CONTROL SYSTEM, S.L. States, on our own responsibi- lity, that all materials here with related comply with the following APM xxx Number of over-pressure 0-999 European Directives: alarms (---).
Page 6
DIAGRAM A INDIVIDUAL SWITCHMATIC 1/2 SWITCHMATIC 3 MANDATORY USE MANDATORY USE OF PRESSURE TANK OF PRESSURE TANK ~1x48-230Vac/Vdc SYSTEM (ONLY SW2) MANDATORY USE OF PRESSURE TANK...
Page 7
DIAGRAM B: POWER SUPPLY AND MOTOR ~1x48÷230Vac/Vdc (SW3) ~1x110÷230Vac (SW1/2) C1 C2 (+) (-) SW1-2 30mA SW1/2 C1 C2 DIAGRAM C: AUXILIARY CIRCUIT IN-OUT CONTACTS RATING Max. switching voltage: 230VAC / 220 VDC Max. switching power: 62,5VA / 30W MAX VOLTAGE Cables: max.
Need help?
Do you have a question about the SWITCHMATIC 1 and is the answer not in the manual?
Questions and answers