Coelbo SWITCHMATIC 1 Advanced Settings
Hide thumbs
Also See for SWITCHMATIC 1:
- Advanced settings (32 pages) ,
- Advanced settings (8 pages) ,
- Advanced settings (48 pages)
Related Manuals for Coelbo SWITCHMATIC 1
Summary of Contents for Coelbo SWITCHMATIC 1
- Page 1 SWITCHMATIC 1 / 1 plus SWITCHMATIC 2 / 2 plus SWITCHMATIC 3 / 3 plus ADVANCED SETTINGS Risk of damaging the pressure assemblies and/or the plant. Risk by electric shock. Risk for people and/or objects.
- Page 2 Before connecting the SWITCHMATIC verify that the hydraulic system is properly installed, especially if the hydropneumatic tank is pressurized. DESCRIPTION (diagram A) SWITCHMATIC 1 is an electronic pressure switch with integrated digital ELECTRIC CONNECTION (diagram B) manometer. It manages the start and stop of a single-phase pump up to The electric connection must be performed by qualified personal in 2.2kW (3 HP) (SW1-2).
-
Page 3: Basic Menu
- By mean of is adjusted the stop pressure from 1 to 8 bar pressure because the flow requirement is excessive. In this (+ version=12 bar) case SWITCHMATIC 1/3 would activate a false dry-running - Press for validation. alarm. 5. The unit is ready to operate but more optional adjustments can be set If these concepts are not clear, it is preferable not configure through basic and advanced MENUS. -
Page 4: Pressure Sensor Calibration
- 2011/65/EU. Remark 5: pressure sensor decalibration should not be a normal event. If it is frequently repeated contact the technical service. Name: - SWITCHMATIC 1 /1+ - SWITCHMATIC 2/2+ - SWITCHMATIC 3/3+ Standards : EN-60730-2-6, EN-60730-1, EN-61000-6-1, EN-61000-6-3, IEC- 60730-1, IEC-60730-2-6 F. - Page 5 DIAGRAM A INDIVIDUAL SWITCHMATIC 1/2 SWITCHMATIC 3 ~1x48-230Vac/Vdc GROUPAL (ONLY SW2)
-
Page 6: Contact Rating
DIAGRAM B (Alarm monitoring) Ausgang alarms CONTACT RATING Max. switching voltage: - 230VAC / 220 VDC CABLE: Max. switching power: max. 1.5mm² - 62,5VA / 30W mín. 0.2mm² Press to release... - Page 7 DIAGRAM C SWITCHMATIC 1/3 SWITCHMATIC 2 DIMESIONS SWITCHMATIC 1/2 SWITCHMATIC 2A/3/3A...
Need help?
Do you have a question about the SWITCHMATIC 1 and is the answer not in the manual?
Questions and answers