Sumake STH-12A Operation Manual

STH-12A, STH-12B, STH-12C
ITEM NO.:
PNEUMATIC TAPPING HAND TOOL
Description
The STH-12 Pneumatic Hand Tapping Tool has a die cast aluminum body with textured finish and taps holes from 2mm to
12mm diameter. Exhaust is directed away from the operator. The STH-12 Pneumatic Hand Tool is and excellent tool for
tapping beams, blocks and other large castings.
Unpacking
Please check for completeness. Refer to the below figure of STH-12A, STH-12B, STH-12C
Safety Rules
Some dust created by power sanding sawing, grinding, drilling and other construction activities contains chemicals

known to cause cancer, birth defects or other reproductive harm.
 Always follow proper operating procedures as defined in this manual-even if you are familiar with use of this or similar
tools. Remember that being careless for even a fraction of a second can result in severe personal injury.
Be alert and think clearly. Never operate power tools when tried, intoxicated o when taking medications that cause

drowsiness.
Operation Manual
1
STH-12-I-1806B-T4