Table of Contents
Advertisement
INSTALLATION
Locate the desired installation position of the electric lock on the frame.
Cut a suitable hole in the frame in order to insert the lock and cut the hole
for the cylinder. Refer to the dimension diagram located in the TECHNICAL
SPECIFICATIONS section.
Connect the correctly wired electrical connector (refer to ELECTRICAL
CONNECTIONS), then install the lock by using suitable screws.
Place the counter lock in face of the lock. Slide to close the door in
order to locate the exact position to make the proper hole into the door.
Cut a hole in the door suitable for the installation of the counter lock.
Install the counter lock by using suitable screws.
Advertisement
Table of Contents
