Avantgarde LBWC-100S2 Instruction Manual page 19

SLIDING SHELF
To remove a sliding shelf:
1. Remove all bottles
2. Pull out the shelf
3. Take out shelf by lifting left side bracket and lowering right side one, then pull out
A
RECOMMENDATIONS FOR LAYOUT AND STORAGE OF YOUR WINE CABINET
•
Your cabinet was designed to store a maximum number of bottles in total security. We
recommend that you observe the tips to optimize loading.
•
Spread your bottles out as evenly as possible over the shelves, so that weight is not
concentrated in one point; also make sure your bottles do not touch the back of the cabinet,
or the step at bottom.
•
Also make sure that bottles are not all grouped together at the top or bottom of the cabinet.
•
Observe the loading instructions provided in section 5, according to the type of storage
fixtures with which your cabinet is equipped, AND NEVER STACK BOTTLES ON A SLIDING
SHELF.
•
Never try to pull out more than one sliding shelf at a time.
PLEASE NOTE
Before modifying your cabinet's original configuration in any way, be sure to ask your dealer for
advice.
11/27/2009
B
19