TABLE DES MATIÈRES 1.DESCRIPTION DES COMPOSANTES………………………………………………..…3 2.PRECAUTIONS IMPORTANTES …………………………………………………….….4 3.INSTRUCTIONS D’INSTALLATION…………………………………………………..5 4.MODE D’EMPLOI………………………………………………………..……………..6-7 5.CAPACITE D’ENTREPOSAGE………………..……………………………………….8-9 6.NETTOYAGE ET ENTRETIEN………………………………………………………….10 7.GUIDE DE DEPANNAGE ……………..……………………………………………….11 11/27/2009...
1. DESCRIPTION DES COMPOSANTES 1. PANNEAU DE CONTRÔLE & REGLAGE DE 6. PIEDS AJUSTABLES TEMPERATURE 7. PENTURE DE PORTE 2. CABINET 8. LUMIÈRE INTÉRIEURE 3. TABLETTES COULISSANTES 9. VENTILATEUR 4. CAVITE INTÉRIEURE 5. BASE DE LA VENTILATION AVANT 11/27/2009...
2. PRÉCAUTIONS IMPORTANTES CONSIGNES DE SÉCURITÉ IMPORTANT AVERTISSEMENT :Pour diminuer le risque d’incendie, d’électrocution ou d’accident pendant l’utilisation de votre appareil, veuillez suivre les mesures de sécurité suivantes : Veuillez lire toutes les instructions avant d’utiliser l’appareil. DANGER ou AVERTISSEMENT : Risque d’emprisonnement pour les enfants. •...
3. INSTRUCTIONS D’INSTALLATION PRÉPARATION ET INSTALLATION DE L’APPAREIL PRÉPARATION • Retirez l‘emballage extérieur et intérieur. • Placez l’appareil à l’endroit qui lui est réservé puis attendez environ deux heures avant de le brancher. Vous éviterez ainsi des ennuis de fonctionnement au niveau du système de refroidissement occasionné...
4. FONCTIONNEMENT DE L’APPAREIL Il est recommandé de placer l’appareil dans un endroit où la température ambiante se situe entre 15 et 25 °C Si la température ambiante est supérieure ou inférieure à la température recommandée il se peut que le fonctionnement de l’appareil en soit affecté. Par exemple, exposer votre appareil à...
Page 7
• Le réglage de la température augmentera de 1° chaque fois que vous appuierez sur la flèche du haut et diminuera de la même façon chaque fois que vous appuierez sur la flèche du bas. • Quand vous utilisez L’ÉTAGE INFÉRIEUR, si la température est réglée entre 10° et 14ºC, la lampe à...
5. CAPACITÉ D’ENTREPOSAGE Les bouteilles peuvent varier en taille et en dimension. Ainsi, votre cabinet est conçu pour être flexible et s’adapter à vos besoins. ABLETTE RÉGULIÈRE : 25 OIDS MAXIMUM VUE DE HAUT VUE DE CÔTÉ VUE DE HAUT VUE DE CÔTÉ...
Page 9
Pour retirer ou déplacer une tablette : 1. Enlever les bouteilles 2. Tirer la tablette vers l’extérieur 3. Détacher en soulevant l’attache de côté gauche (A) et en baissant celle de droite(B), puis tirer. RECOMMENDATIONS POUR L’ENTREPOSAGE • Votre cabinet a été conçu pour entreposer un maximum de bouteilles en toute sécurité. Nous recommandons que vous observiez les consignes mentionnées pour optimiser son utilisation.
6. ENTRETIEN DE L’APPAREIL NETTOYAGE DE L’APPAREIL • Coupez le courant, débranchez l’appareil et videz le contenu incluant les tablettes. • Lavez les surfaces intérieures avec de l’eau chaude et une solution au bicarbonate de soude • (2 cuillères à soupe pour ¼ d’eau). •...
7. DÉPANNAGE DES ENNUIS AVEC VOTRE CELLIER ? Vous pouvez facilement résoudre plusieurs des problèmes courants de votre appareil et vous épargner ainsi des frais de service. Essayez les suggestions ci-dessous qui s’appliquent à votre situation avant de faire appel à un professionnel. PROBLÈMES CAUSE(S) POSSIBLE(S) •...
Page 12
TABLE OF CONTENTS 1.COMPONENTS AND PARTS …………………………………………………..13 2.SAFETY PRECAUTIONS ………………………………………………………..14 3.INSTALLATION INSTRUCTIONS …………………………………………...15 4.OPERATING YOUR APPLIANCE……………………………………….……….16-17 5.LAYOUT & STORAGE …………………………………………………… ..18-19 6.CARE AND MAINTENANCE ………………………………………………………..20 7.TROUBLESHOOTING GUIDE………………………………………………….…… 21 11/27/2009...
2-IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when WARNING using your appliance, follow these basic precautions: READ ALL INSTRUCTIONS BEFORE USING THE WINE COOLER DANGER OR WARNING: RISK OF CHILD ENTRAPMENT. • Child entrapment and suffocation on are not only problems of the past. Junked or abandoned appliances are still dangerous even if they will “just sit in the garage for a few days”.
3-PREPARATION & INSTALLATION INSTRUCTIONS Before Using Your Wine Cooler • Remove the exterior and interior packaging. • Before connecting the Wine Cooler to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
4-OPERATING YOUR WINE COOLER The wine cellar should be placed where the ambient temperature is between 15 to 25 ºC. If the ambient temperature is above or below this range, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
Page 17
NOTE: • If the unit is unplugged, power lost, or turned off; you must wait 3 to 5 minutes before restarting. If you attempt to restart before this interval the Wine Cooler will not start. • When you use the wine Cooler for the first time or restart the wine Cooler after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout.
5-LAYOUT AND STORAGE Your cabinet was designed to be flexible, to be able to adapt to your requirements Normal Shelf Max Weight: 25kgs 11/27/2009...
Page 19
SLIDING SHELF To remove a sliding shelf: 1. Remove all bottles 2. Pull out the shelf 3. Take out shelf by lifting left side bracket and lowering right side one, then pull out RECOMMENDATIONS FOR LAYOUT AND STORAGE OF YOUR WINE CABINET •...
6-CARE AND MAINTENANCE CLEANING YOUR WINE COOLER • Turn off the power, unplug the appliance, and remove all items including shelves and rack. • Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda with a quart of water.
7-TROUBLESHOOTING GUIDE You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the authorized service center. PROBLEM POSSIBLE CAUSE Wine Cooler does not operate. Not plugged in.
Need help?
Do you have a question about the LBWC-100S2 and is the answer not in the manual?
Questions and answers