Charging The Li-Ion Battery - Shark VACMOP VM180 Series Owner's Manual

Your Shark VACMOP™ unit comes partially assembled with a cord connecting the parts. All versions assemble
the same way. This appliance is for Household use only.
1. Align and insert the Handle into the top of the Pole. You will feel it click in place.
2. Align and insert the pole into the Main Body. You will feel it click in place.
For proper operation, ensure all components are completely connected and clicked into place.
Handle
1.
(Click)
Pole
2.
(Click)
Main
Body
NOTE: The model and serial numbers can be found on the QR code label on the back on the main body.
s h a r kc l e a n . c o m
ASSEMBLY
Hanging
Loop
Spray
Vacuum
Button
Trigger
Reservoir
Lid
LED
Indicator
Charging
Connector
Spray
Nozzle
Disposable
Pad Release

CHARGING THE LI-ION BATTERY

DC CHARGER
Plug charger into an electrical outlet.
Spray Button
Vacuum Trigger
VACUUM TRIGGER AND SPRAY BUTTON
NOTE: The spray button and vacuum trigger cannot be activated at the same time.
DC CHARGING CONNECTOR
Plug the charger into the port on the back of the
main body.
CONTROLS
Spray Button
Press and hold the spray button on top of the handle to
dispense cleaning solution through the spray nozzle.
Vacuum Trigger
To vacuum, pull the trigger and hold it in.
s h a r kc l e a n . c o m