Charging The Li-Ion Battery - Shark VacMop QM250 Series Owner's Manual

Your VACMOP™ unit comes partially assembled with a cord connecting the parts. All versions assemble the
same way. This appliance is for Household use only.
1. Align and insert the Handle into the top of the Pole. You will feel it click in place.
2. Align and insert the pole into the Main Body. You will feel it click in place.
Handle
1.
(Click)
Pole
2.
(Click)
Main
Body
Headlights
NOTE: The model and serial numbers can be found on the QR code label on the back on the main body.
s h a r kc l e a n . c o m
ASSEMBLY
Hanging
Loop
Spray
Vacuum
Button
Trigger
Reservoir
Lid
LED
Indicator
Charging
Port
Spray
Nozzle
VACMOP
Base
Disposable
Pad Release

CHARGING THE LI-ION BATTERY

MAGNETIC CHARGER
Plug charger into an electrical outlet.
CONTROLS
Spray Button
Vacuum Trigger
VACUUM TRIGGER AND SPRAY BUTTON
Spray Button
Press and hold the spray button on top of the handle to
dispense cleaning solution through the spray nozzle.
Vacuum Trigger
To vacuum, pull the trigger and hold it in.
MAGNETIC CHARGING CONNECTOR
Connect the magnetic charger to the port on the
back of the main body.
HEADLIGHTS
AUTOMATIC HEADLIGHTS
When the VACMOP™ is in use, the motion sensor
will automatically activate the headlights. After 10
seconds of inactivity, the headlights will turn off.
s h a r kc l e a n . c o m