Sealife ReefMaster Mini Instruction Manual page 52

3. If you select [Select] in the previous
step, the figure shown on the right hand
side will appear.
 Select the multi images that you
want to print simultaneously with
the  /  buttons.
 Select the [Print Num.] (up to 99)
with the  /  buttons.
 After selecting the desired image
and printing number, press the OK
button to confirm.
4. Select [Print] with the  / 
buttons, and press the OK button
to start printing.
5. The printing starts and the figure shown
on the right hand side appears.
 The [Complete] will be displayed
temporarily, reminding you that the
printing procedure is finished.
 If a print error is detected, the [Print
Error] will be displayed.
 The image printing may fail if the power to the camera is cut off.
EN-50