Sealife ReefMaster Mini Instruction Manual page 48

To Cancel the Protection
To cancel protection for only one image, display the image that you want to remove
the image protection.
1. Select [Protect] with the  /  buttons from the playback menu, then press the OK
button.
2. Select [Single] or [All] with the  /  buttons, then press the OK button.
3. Select [Cancel] with the  /  buttons, then press the OK button.
 Press continuously the  button to return to the playback mode. The removal
of image protection has been executed.
Protecting Selected Images
1. Select [Protect] with the  /  buttons from the playback menu, then press the OK
button.
2. Select [Select] with the  /  buttons, then press the OK button.
 The images are displayed in the thumbnail display.
3. Select the image you want to protect with the  /  /  /  buttons, then press the
OK button.
4. If you want to cancel the protection of selected image respectively, follow the steps
mentioned in "To Cancel the Protection" above to set.
 Formatting an SD memory card overrides protection, and erases all images
regardless of their protected status.
EN-46