D-Link DWL-AG530 Quick Installation Manual page 10

K. SSID: The Service Set
Identifier is the name as-
signed to the wireless
network. The factory SSID
setting is set to default. Make
changes here to match the
SSID on existing Wireless
Router or Access Point.
N. Authentication:
the authentication mode for the
wireless network. The default
setting is set to Open Authentica-
tion.
P. IEEE 802.1x: When encryption is enabled, you will have the option to specify the level
and key format of the encryption used. Select the appropriate Key Index : 1-4 and enter
ACSII or hexadecimal digits in the appropriate field.
L. Wireless Mode:
The factory setting is
set to Infrastructure.
Ad-Hoc mode is used
for peer-to-peer
networking.
K
L
M
N
O
P
You can specify
M.
default setting is set to
Disabled. The adapter
supports WEP and AES
when encryption is enabled.
O. Key Length: When encryption is enabled,
you will have the option to specify the level and
key format of the encryption used. Select the
appropriate Key Index : 1-4 and enter ACSII or
hexadecimal digits in the appropriate field.
10
Data Encryption: The