Preset Mode - Samoa 383 401 Parts And Technical Service Manual

EN
USING YOUR U·VISION

PRESET MODE

This mode is based on predefined work orders that must be
defined in U·track (Fig. 7).
Each work order will be related to a specific product,
If this mode is correctly defined, when the U·vision
awakened, it will try to update the work orders (Fig. 8).
If there are no work orders available (Fig. 9), it displays a
warning message, otherwise, if there are work orders
defined for this dispensing point, U·vision
the user's pin (Fig. 10).
ERROR: NO OT RECEIVED
In this mode, the system verifies step by step, first the USER;
if the user exists, the U·vision
work orders (Fig. 11). It is possible to choose the required
SELECT JOB
ABCDEFGH
Fig. 11
In both modes, the Back button allows you to cancel the transaction in progress.
6
838 856 R. 06/23
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
+
allows entering
+
010
ERROR
Fig. 9
displays the list of associated
+
010
?
wo
WAITING TRANSACTION
1 -1
defining the quantity to be dispensed and the number of
repetitions that this order can execute.
Fig. 7
is
+
work order and after the relevant verification (Fig. 12) the
transaction starts (Fig. 13) with the associated amount in
the U·track.
010
Fig. 12
UPDATING OTS...
?
wo
?
wo
?
wo
Fig. 8
ENTER USER PIN
1
Fig. 10
0.00
Fig. 13
010
003
?
010
1.00 L