Table of Contents
Advertisement
1886
Put the blade washers, found in the
blade screws, found in the
hardware bag. Then install the blade
screws to secure each blade to a blade iron.
Repeat x4
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag, onto the
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
Ridge
Canopy
Blades
x2
Canopy Screw
bag
x12
Blade Screw
bag
Washer
bag
x8
Blade Arm Screw
bag
Lightly attach the blade arms to the motor with
screws found in the
hardware bag, then
securely tighten after both screws are attached.
Repeat x4
Light
Bulbs/Cage
Remote Cradle
x12
Advertisement
Table of Contents
