Table of Contents
Advertisement
Removing and installing hardware
This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Important safety information" on page 1.
External options
You can connect external options to your computer, such as external speakers, a printer, or a scanner. For
some external options, you must install additional software in addition to making the physical connection.
When installing an external option, see Chapter 3 "Product overview" on page 29 to identify the required
connector. Then, use the instructions that come with the option to help you make the connection and install
any required software or device drivers.
Power cord
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Turn off the computer and remove all connected peripheral devices and cables.
2. Remove the power cord from the computer.
3. Connect the new power cord to the computer.
Computer upper cover
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
.
Chapter 6
Hardware removal and installation
57
Advertisement
Table of Contents
