Table of Contents
Advertisement
9. Remove the memory module. "Memory module" on page 68.
10. Remove the heat sink. "Heat sink" on page 69.
11. Remove the system fans. "System fans" on page 70.
12. Remove the M.2 solid-state drive. "M.2 solid-state drive" on page 71.
13. Remove the Wi-Fi card. "Wi-Fi card" on page 72.
14. Remove the speaker. "Internal speaker" on page 73.
15. Remove the system board. "System board" on page 74.
16. Remove the middle frame. See "Middle frame" on page 76.
17. Remove the front bezel.
18. Install the new front bezel.
19. Reinstall the removed parts in reverse order of the removal steps mentioned above.
20. Reconnect all disconnected cables to the computer and reconnect the power cord to the electric outlet.
LCD panel
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 57.
2. Remove the computer upper cover. See "Computer upper cover" on page 57.
3. Remove the system stand. See "System stand (with or without wireless charging module)" on page 59.
4. Remove the computer back cover. See "Computer back cover" on page 59.
80
IdeaCentre AIO 5 Hardware Maintenance Manual
Advertisement
Table of Contents
