Information Codes - Samsung NX60 87 Series User Manual

Problem Cause
Food does not The wrong cooking mode
bake or roast is selected.
properly in the
The oven racks have not
oven.
been positioned properly
for the foods being
cooked.
Incorrect cookware or
cookware of improper
size is being used.
The oven thermostat
needs adjustment.
There is aluminum foil on
racks or oven bottom.
The clock or timers are
not set correctly.
Food does not The oven controls are not
broil properly in set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.
Action
See page 21.
See page 22.
See page 17.
See page 34.
Remove foil.
See page 16.
See page 25.
See page 25.
See the broiling guide on page
26.

Information codes

Code symbol Meaning
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC Sensor.
Temp probe malfunction.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal malfunction.
Oven vent blocked.
** If these solutions do not solve the problem, contact a local Samsung service
center or call 1-800-SAMSUNG (1-800-726-7864).
Solution
1. Tap OFF, and then restart the
oven.
2. If the problem persists, disconnect
all power to the oven range for
at least 30 seconds and then
reconnect the power.
1. If oven vent or cover air is
blocked by aluminum foil
or others, remove that and
restart oven.
2. To reset error, disconnect
power or tap 'OFF' after
opening the oven door at
least 60 seconds.
English 53